Notification

Our software update is being released in phases. New features will gradually roll out across all regions. Stay tuned for updates.

Fix a Pixel screen that doesn't work correctly

Find touch diagnostics

Important: Diagnostics are available on the Pixel 9, Pixel 9 Pro and Pixel 9 Pro XL only.

  1. Open your phone's Settings app.
  2. Tap Display and touch and then Touch diagnostics.
Learn what information is shared with Google

If you share device and touch-screen diagnostics information and related settings, your phone can send info such as:

  • Account info
  • Your phone's IMEI (International Mobile Equipment Identity) number
  • Model name (such as Pixel 9 or Pixel 9 Pro)
  • Session ID number
  • Settings details, such as adaptive touch mode and screen protector mode
  • Touchscreen hardware signals

Try the solutions below if your phone screen:

  • Doesn’t respond
  • Flickers
  • Jumps
  • Flashes
  • Shows dead pixels
  • Stays blank

On Pixel 5 phones, if you see a white dot at the top of your screen, learn about your proximity sensor.

Important: After you try each recommended solution, check to find whether it fixed your issue.

Step 1: Check your phone's screen

  1. Make sure that your screen isn't cracked, chipped or damaged.
  2. If you have a case or screen protector, take it off.
  3. If you're wearing gloves, take them off.
  4. If you've put any stickers over the screen or sensors, peel them off.
  5. Make sure that your screen is clean.

Step 2: Try these troubleshooting steps

Restart your phone
  1. On most phones, press your phone's power button for about 30 seconds, until your phone restarts.
  2.  On the screen, you might need to tap Restart Restart.

Tip: After you restart, if your touchscreen is still completely unresponsive, learn how to reset your phone to factory settings (below).

Find out if an app causes your problem
  1. Turn on safe mode. Find out how to turn on safe mode
  2. Once you're in safe mode, touch the screen.
    • If your screen works in safe mode, a downloaded app is most likely causing your issue.
      1. To exit safe mode, restart your phone.
      2. To find the app that’s causing issues, uninstall recently downloaded apps one by one.
      3. After you remove the app that's causing the problem, you can re-install the other apps that you removed.
    • If your screen doesn't work in safe mode, continue to the next section.
Tip: Aeroplane mode is automatically turned on when you enter safe mode. We recommend turning off aeroplane mode in order to continue using features, such as GPS, Wi-Fi and making phone calls.
Tip: Aeroplane mode is automatically turned on when you enter safe mode. We recommend turning off aeroplane mode in order to continue using features, such as GPS, Wi-Fi and making phone calls.
Test the affected part of your screen
  1. Touch the top-left corner of the screen.
  2. Slowly drag your finger to the bottom-right corner without lifting. Try to move your finger slowly enough so that you can count to 10 before reaching the opposite corner of the screen.Drag your finger across the screen image
    • If you can drag your Quick Settings bar and notifications all the way to the bottom of the screen
      The problem isn't caused by a specific area on your screen. Learn how to reset your phone to factory settings (below).
    • If your Quick Settings bar and notifications release while you're still dragging your finger across the screen
      Repeat the test. If they release again, note whether it happened in the same place on the screen. Then learn how to get help.
Understand the white dot at the top of the screen (Pixel 5)

Under your Pixel 5 phone’s screen, at the top centre, you can see a white dot. This white dot is your proximity sensor. When your proximity sensor is on, the dot shows through the display. The dot can blink or stay solid.

Your proximity sensor keeps your phone’s screen off while you hold your phone near your face during a call, when your screen is locked and when used by certain apps. Keeping the screen off helps save battery life and avoids accidental taps on the screen.

All Pixel phones have proximity sensors. Because the Pixel 5’s display goes almost to the edge, you can see the Pixel 5’s sensor under the screen. Take a look at our Pixel 5 phone diagram.

Step 3: Use advanced troubleshooting

Turn off Developer options
  1. Open your phone's Settings app.
  2. Tap System And then Developer options. You'll see this only if you have Developer options turned on.
  3. Turn off Developer options.
Consider resetting your phone to factory settings
Important: A factory data reset will remove all data from your phone. You can restore any data stored in your Google Account, but all apps and their associated data are uninstalled. Before you perform a factory data reset, back up your phone.

Tips:

  • If your phone doesn't respond or stays blank, you can use your phone's buttons to trigger a factory data reset.
  • If an app that you downloaded caused the issue and you reinstall that app, the problem could come back.
Post your question to a Google community

Related resources

Search
Clear search
Close search
Main menu
10796902308285380073
true
Search Help Centre
true
true
true
true
true
1634144
false
false